Blog

Dosage and Flavor-Masking Strategies for Algal DHA Powder in Plant-Based Beverages

Plant-based beverages are evolving from simple "dairy alternatives" into "functional delivery vehicles," with DHA fortification representing one of the most commercially promising avenues in this transition. However, the incorporation of algal DHA powder introduces two interrelated technical challenges: determining an effective and compliant dosageVeensuring that the addition remains imperceptible to consumers. The former is constrained by both regulations and sensory thresholds, while the latter determines whether the product can maintain an acceptable consumer experience throughout its intended shelf life. This article explores the intersection of these two constraints, discussing practical frameworks for dosage and strategies for masking off-flavors.

I. The Dual Constraints on Dosage: The "Feasible Window" Between Regulatory Limits and Sensory Thresholds

When designing plant-based beverages fortified with algal DHA, formulators are not dealing with an unconstrained variable, but rather a narrow range defined by specific upper and lower boundaries.

The upper limit is primarily dictated by regulations. For instance, under the European Union’s framework for novel foods, the maximum permitted level of DHA derived from microalgae (*Schizochytrium* sp.) in non-alcoholic beverages—explicitly including dairy analogues and plant-based milk alternatives—is 80 mg of DHA per 100 mL. For a 250 mL serving of plant-based milk, this translates to an upper limit of approximately 200 mg of DHA. This figure establishes a strict, non-negotiable regulatory ceiling for product formulation.

The lower limit, conversely, is determined by sensory considerations. A systematic sensory study conducted at The Ohio State University offers findings with direct practical implications: in soy milk, the addition of 0.2% algal oil does not affect overall acceptability, whereas concentrations of 0.6% or higher lead to a significant decline in consumer acceptance. In oat milk, a 0.2% inclusion of algal oil is not only well-tolerated but actually results in a slightly higher overall preference score compared to the control sample. Based on the typical DHA concentration found in algal oil, a 0.2% addition translates to a DHA intake of several tens of milligrams per 250 mL serving—well within regulatory limits, yet already constrained by sensory considerations. Even more concerning is the "matrix effect": almond milk has proven to be the least "friendly" base for algal oil fortification, with consumer rejection occurring at every tested concentration level.

In other words, the amount permitted by regulation may not be acceptable from a sensory perspective; furthermore, the level that is sensorially acceptable varies significantly depending on the plant-based matrix. There is no single, fixed "permissible" inclusion level; rather, it is a range that must be defined individually for each type of matrix. For oat and soy milk, a 0.2% inclusion of algal oil (by weight) serves as a sensory-validated, safe starting point. If using high-load microencapsulated powders (e.g., those with 15%–20% DHA content), it may be possible to achieve higher DHA levels through careful powder formulation—provided this is verified by sensory testing, rather than relying solely on stoichiometric calculations.

II. The Core Logic of Flavor Masking: Treating "Fishy" Off-Notes as a Mass-Transfer Issue

The off-flavors associated with algal-derived DHA are not caused by a single compound, but rather by the combined sensory impact of volatile aldehydes, ketones, and alcohols generated through lipid oxidation. Consequently, masking strategies should not be limited to the superficial approach of "covering up" the taste with flavorings; instead, they must simultaneously address the inhibition of oxidationvethe prevention of flavor release.

First Level: Microencapsulation is the foundation, but the choice of wall material determines the upper limit of effective masking. Spray-drying microencapsulation is the most well-established method for producing DHA powder in the food industry; however, the effectiveness of different wall material systems in masking off-flavors varies significantly. While microcapsules using buttermilk—or a combination of buttermilk and maltodextrin—as wall materials can achieve an encapsulation efficiency exceeding 95%, researchers have noted that they are "relatively ineffective at masking fishy odors," with a distinct fishy smell still perceptible. This demonstrates that a high encapsulation efficiency does not automatically equate to superior sensory performance. One approach for improvement involves the use of composite wall materials based on dual proteins: a system comprising casein, soy protein, and mono- and diglycerides can boost encapsulation efficiency to approximately 96% and extend the oxidation induction period by more than 240% compared to unencapsulated algal oil. Another noteworthy plant-based strategy involves the glycosylation of zein (corn protein). When used as a wall material, this modified zein keeps the peroxide value of the encapsulated algal oil significantly lower than that of oil encapsulated with unmodified materials or unencapsulated oil. It extends the shelf life at room temperature by approximately 240 days compared to unencapsulated oil, while maintaining a DHA retention rate of 96.95%. For products aiming for "clean label" status or a fully plant-based positioning, such wall material strategies offer clear advantages in terms of formulation compatibility.

The second layer—interfacial engineering—focuses on "intercepting" the release of off-flavors at the surface of oil droplets. Even when oxidation is suppressed to a low level, residual volatile odor molecules can still diffuse from the oil droplets into the aqueous phase or the headspace, where they may be detected by consumers. The core of the interfacial engineering strategy lies in constructing a physical and chemical barrier between the oil droplets and the external environment that is sufficiently dense and thick. Research by Sun et al., published in *Food Hydrocolloids*, offers a plant-based solution that can be directly applied: using pea protein as an emulsifier, flaxseed gum is deposited onto the surface of the protein-coated oil droplets via electrostatic deposition, creating a pea protein/flaxseed gum interfacial coating. Headspace volatile analysis reveals that this interfacial coating significantly reduces the levels of heptanal and (E,Z)-3,5-octadien-2-one in algal oil—compounds primarily responsible for its characteristic "fishy" off-flavor. The mechanism involves the interfacial layer simultaneously inhibiting lipid oxidation and curbing the release of off-flavor compounds from the oil droplets into the aqueous phase. Increasing the concentration of flaxseed gum enhances the thickness of the interfacial layer, while the interfacial tension drops from 18.7 nN/m (with pea protein alone) to 14.6 nN/m (with the protein-polysaccharide complex), indicating that the inclusion of the polysaccharide improves both interfacial activity and coverage efficiency.

Level 3: Double emulsions and layer-by-layer assembly further enhance stability and sensory performance. Building upon interfacial engineering, the creation of double emulsions can push the masking effect closer to the threshold of "ambient stability." Double emulsions of DHA-rich algal oil—stabilized at the interface by a perilla protein isolate/flaxseed gum complex—have been shown to provide superior masking of the algal oil’s off-flavor, while also protecting the DHA content over a 21-day storage period without the need for additional antioxidants. The value of this double-layered structure lies in its dual functionality: the inner layer handles emulsification and serves as a primary barrier against oxidation, while the outer layer—formed via electrostatic complexation—increases the thickness and density of the interface, creating a robust barrier against both oxidative chain reactions and the diffusion of off-flavor compounds. For plant-based beverages requiring a longer shelf life or distribution through ambient-temperature supply chains, this represents one of the most effective technical approaches currently documented for balancing masking efficiency with overall product stability.

III. Practical Considerations for Formulation

When translating these strategies into commercially viable plant-based beverage formulations, several often-underestimated variables must be factored into the design process.

The choice of base matrix is not neutral. Oat milk and soy milk have been shown to be relatively "forgiving" carriers for algal oil from a sensory perspective; in contrast, almond milk—due to its high degree of unsaturation and distinct flavor profile—presents a much higher risk. If a product is positioned as almond-based, a "universal" masking solution will likely prove inadequate; instead, the interfacial composition must be specifically adjusted, or the target DHA dosage lowered.

Sweetness and the flavor base act as "covariates" in any masking strategy. In the aforementioned sensory study, the control beverage had low sweetness and no added flavoring—factors the researchers identified as potential reasons for its low overall acceptability. This suggests that in a commercial product, a well-calibrated sweetness profile combined with flavor notes that naturally complement a plant-based base (such as cereal, nutty, or vanilla tones) can enhance overall acceptability without relying solely on "covering up" off-notes. This, in turn, provides greater flexibility regarding the amount of DHA that can be incorporated.

The DHA loading capacity and dispersibility of microencapsulated powders must be evaluated in tandem. Commercially available microencapsulated algal DHA powders typically offer loading capacities ranging from 10%–13% to 15%–20%. Some product lines are specifically engineered for vegan dairy and plant-based applications, emphasizing "ultra-low odor and taste" alongside "uniform dispersibility" in beverage systems. While high-loading powders reduce the total quantity of ingredients required, the higher concentration of algal oil per unit of mass may impose more rigorous demands on the masking system. Therefore, selection should not be based on DHA content alone; it must also account for dispersion stability within the specific plant-based matrix and empirical sensory validation data.

The successful integration of algal DHA powder into plant-based beverages is, at its core, a matter of establishing a repeatable engineering pathway that navigates the space between regulatory upper limitsvesensory lower thresholds. The appropriate dosage must be determined individually for each specific matrix, and masking strategies should be designed holistically—addressing both the encapsulating wall material and the interface—rather than relying on a single, isolated approach. Only when formulation design treats "inhibiting oxidation" and "preventing the release of off-notes" as two sides of the same challenge can DHA-fortified plant-based beverages achieve a sustainable balance between nutritional claims and the consumer drinking experience.

B96配图(1)